Composite Decking Boards
-
3D Decking Boards
3D composite terrace boards are made by combining natural components with thermoplastic polymers, which makes them perfectly imitate natural wood while retaining the advantages of plastics, primarily durability and ease of keeping clean. The wood pattern is embossed on the surface using presses, making it durable and resistant to abrasion. The other side has narrow grooves so that the board can be used on both sides. These composite boards are great for outdoor use because they resist bad weather, rotting, and insects, and are very effective in arranging outdoor spaces.
Composition:
- wood flour (60%)
- high density polyethylene (35%)
- chemical additives (5%)
Dimensions:
- Length 400cm
- Width 14cm
- Thickness 2.3cm
One board is enough for 0.579 sq.m of terrace.
-
Premium Composite Decking Boards
The new generation Premium Composite Board is a high-quality product. The board has a characteristic structure of the natural grain of the boards. The wood pattern is embossed on the surface by presses at high temperatures with an external polymer coating applied that surrounds the board on all sides and protects it from stains and color loss. It is also durable and resistant to abrasion. The internal structure of the board is much stiffer and more resistant to mechanical damage due to the use of a special cross-section of round chambers and high density of the composite.
Composition:
- wood flour (60%)
- high density polyethylene (35%)
- chemical additives (5%)
Dimensions:
- Length 400cm
- Width 14cm
- Thickness 2.2cm
One board is enough for 0.579 sq.m of terrace.
Composite Façade Cladding Boards
-
Standard Cladding Boards
The Standard Composite Facade Board is a comfortable material for effective façade development. The boards are resistant to adverse weather conditions, rotting, decay and insects. This technology guarantees a long-term use, and at the same time, ease of cleaning.
Composition:
- wood flour (55% )
- HDPE high density polyethylene (35%)
- chemical additives (10%)
Dimensions:
- Length 280cm
- Width 16.5cm
- Thickness 2 cm
One board is enough for 0.406 sq.m of the facade.
-
Premium Façade Cladding Boards
The Premium Composite Elevation Board is a comfortable material for effective facade development. The wood pattern is embossed onto the surface by presses at high temperatures with an external polymer coating applied to protect it from staining and color loss. The boards are resistant to adverse weather conditions, rotting, decay and insects. This technology guarantees a long-term use, and at the same time, ease to clean.
Composition:
- wood flour (55% )
- HDPE high density polyethylene (35%)
- chemical additives (10%)
Dimensions:- Length 290cm
- Width 15.6cm
- Thickness 2.1cm
One board is enough for 0.41 sq.m of the façade.
-
Premium Lamella Composite Board
The Premium Lamella Composite Façade Board is a material for effective façade development. The slats are extruded at high temperatures with an outer polymer coating applied to protect them from staining and color fading. The boards are resistant to adverse weather conditions, rotting, decay and insects. This technology guarantees a long period of use, and at the same time, easy to clean.
Composition:
- wood flour (55% )
- HDPE high density polyethylene (35%)
- chemical additives (10%)
Dimensions:
- Length 290cm
- Width 21.9cm
- Thickness 2.6cm
One board is enough for 0.58 sq.m of the façade.
Composite Fence Boards
-
Standard Fence Board
The Standard fence board is a convenient material for quick assembly of durable fences. The boards perfectly imitate natural wood, while retaining the advantages of plastics, especially durability and ease of cleaning. The surface of the Standard boards is smooth.
Dimensions:
- Length 180cm
- Width 16.2cm
- Thickness 2cm
-
Premium Fence Boards
Premium fence boards have a wood pattern embossed on the surface by means of presses at high temperatures with an external polymer coating applied. They perfectly imitate natural wood and at the same time retain the advantages of plastics, especially durability and ease of cleaning. The polymer coating additionally protects against colour loss and stains.
Dimensions:
- Length 180cm
- Width 16.2cm
- Thickness 2cm
ATTENTION
Please contact regarding the available colours and stock quantity.
Polycarbonate Sheets
-
Polycarbonate Sheet Twinwall 10mm
Channel polycarbonate is an excellent choice for covering a greenhouse, shed, pergola, conservatory, swimming pool or canopy. It is a transparent polymer with extremely high impact resistance (even at low temperatures). It is mechanically strong, has good dielectric properties, and is resistant to radiation.
Extremely high-quality polycarbonate sheets are produced by extrusion. They are easy to install.
The application of channel polycarbonate often occurs and can be seen in installed terrace roofs. The transparent roof covering does not darken the interior of the terrace and ensures a long service life. Also due to its transparency, lightness, good thermal conductivity coefficient, without roofs, polycarbonate sheets are widely used in walls, conservatories, greenhouses, advertising and other structures. Double-chamber panels made of polycarbonate are covered with an additional protective layer that ensures high resistance to water and the effects of the atmosphere and UV rays.Thickness - 10mm
Width - 1050mm
Available lengths:
- 2000mm
- 3000mm
- 4000mm
- 6000mm
-
Polycarbonate Sheet Triplewall 16mm
Channel polycarbonate is an excellent choice for covering a greenhouse, shed, pergola, conservatory, swimming pool or canopy. It is a transparent polymer with extremely high impact resistance (even at low temperatures). It is mechanically strong, has good dielectric properties, and is resistant to radiation.
Extremely high-quality polycarbonate sheets are produced by extrusion. They are easy to install.
The application of channel polycarbonate often occurs and can be seen in installed terrace roofs. The transparent roof covering does not darken the interior of the terrace and ensures a long service life. Also due to its transparency, lightness, good thermal conductivity coefficient, without roofs, polycarbonate sheets are widely used in walls, conservatories, greenhouses, advertising and other structures. Double-chamber panels made of polycarbonate are covered with an additional protective layer that ensures high resistance to water and the effects of the atmosphere and UV rays.Thickness - 16mm
Width - 1050mm
Available lengths:
- 2000mm
- 3000mm
- 4000mm
- 6000mm
-
Polycarbonate Sheet MK PC Diamonds
The wavy diamond sheet structure is a distinctive feature of MK PC Diamonds polycarbonate sheets.
The hexagonal raised surface gives MK PC Diamonds sheets a unique appearance, thus achieving an eye-catching design and lighting effects.
MK PC Diamonds are extremely strong, tough, corrugated polycarbonate sheets. 2.8 mm. thick sheets are stronger and tougher than other plastic sheets with superior load-bearing properties.
Naturally transparent sheets provide exceptional light transmission. Sheets covered with a UV-resistant layer are resistant to temperature fluctuations and long-term weathering.Width - 1000mm
Available lengths:
- 2000mm
- 3000mm
- 4000mm
- 6000mm
-
Polycarbonate Sheet MK PC Diamond Tile Effect
MK PC Diamond TILE EFFECT polycarbonate is a 2.8 mm thick imitation tile sheet, extremely strong and durable, with the highest load-bearing properties.
The hexagonal raised surface of the diamond structure gives the sheets a unique appearance, thus achieving an eye-catching design and lighting effects.
Naturally transparent sheets provide exceptional light transmission. The sheets are covered with a layer resistant to UV rays, are resistant to temperature fluctuations and long-term atmospheric effects.Width - 960mm
Available lengths:
- 2000mm
- 3000mm
- 4000mm
- 6000mm
Accessories
-
H Profile Clear Joining Strip
Suitable for joining multiwall or solid polycarbonate sheets.
PVC profiles come in lengths of 2000mm, 3000mm, 4000mm, and 6000mm to fit polycarbonate sheets that are 10mm and 16mm thickness.
-
Clear Joining Profile (Snap type)
Snap type polycarbonate joining profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
-
PVC U Profile
A PVC plastic profile supplied as an accessory to close the end of Multi-wall roofing sheet.
Suitable for use with 10mm and 16mm multiwall Sheets.
-
Aluminum connection top profile
Aluminum connection top profile with two rubber seals for polycarbonate connection.
Material - aluminum with 2 sealing rubbers.
Color - aluminum.
ATTENTION
Please contact regarding the available colours and stock quantity.
PVC Covers
-
Column
PVC covers are suitable for pergolas and gazebos. They protect outdoor spaces from harsh weather conditions, allowing people to enjoy the outdoors throughout the year.
Our PVC covers are made from top-quality materials manufactured in Europe. They are waterproof and offer protection against harsh winds and rain for your pergola and outdoor furniture. The clear PVC material is UV-protected, allowing sunlight to pass through while shielding you from harmful UV rays.
To order please provide us with the following information:
- Your location
- The size of your pergola
- Please provide photographs of your pergola to see if it is possible to hang the covers without having to adjust the structure.
